Free shipping on every ordersee exceptionsNot sure which seal? Try our Seal Finder →Hinge? Hinge Finder →
CRL SDS200C Gray Flat Vinyl Sweep, 100' Roll profile and installed drawing
CRL · Part SDS200CIn stock

Gray Flat Vinyl Sweep, 100' Roll

A 100' roll of flat 1-1/2" gray sweep for hinged doors.

$170.08/roll
+ Free shipping
100'Cut to fit
Slide inInto door frame
Ships free to your doorFree on every order to the lower 48 states and DC. Usually ships in 3–7 business days.
Cut it to lengthCRL PTS89 Plastic Trim Snips for Cutting SealsClean, straight or angled cuts on vinyl and plastic seals. $88.49
Free shippingOn every order
All sales finalCheck your glass thickness.
Not sure it fits?Try the Seal Finder
OverviewSpecsFAQ

About this seal

The CRL SDS200C is a 100 ft. gray flat vinyl sweep, 100' roll. Made by C.R. Laurence (CRL); available in gray.

Flat 1-1/2" gray vinyl bottom seal and wipe for hinged shower doors, on a 100-foot roll.

  • 100' roll
  • Flat 1-1/2" gray vinyl
  • Hinged doors

Fit & specs

Glass thicknessAny
Installs bySlides into the door frame
Used forFramed doors
Bottom of the door
Length100 ft. (30 m)
MaterialVinyl
Width1-1/2 in. (38 mm)

Common questions

How do I install the CRL SDS200C?

Slide it into the slot in the door's bottom rail from the end.

How do I cut the CRL SDS200C to length?

Measure the width of the door at the bottom, then cut the seal with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. Cut it a hair short so the ends don't drag on the wall or panel.

How long is the SDS200C?

It comes in a 100 ft length.

Can I return the SDS200C?

No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.

Finish the job

You may also need