Clear Replacement Vinyl Insert (per foot)
Replacement insert for our vinyl-insert jamb seals.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this seal
The CRL V600CSGFT is a clear replacement vinyl insert (per foot). Made by C.R. Laurence (CRL); available in clear.
The clear 'T' vinyl insert used in our heavy-duty and corner jamb seals (P090SJ, P180SDJ, P120SDJ, P045DJ, P135DJ, P045SJ, P135SJ). Sold by the foot with a 100-foot minimum.
- Replacement insert for jamb seals
- Sold by the foot
- Minimum order: 100 ft
Fit & specs
| Glass thickness | Any |
|---|---|
| Installs by | Presses into the channel |
| Used for | Glazing channel |
| Material | Vinyl |
Common questions
How do I install the CRL V600CSGFT?
Press it into the channel by hand.
How do I cut the CRL V600CSGFT to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
Can I return the V600CSGFT?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
You may also need
Ships from IDEALIDEAL Bath Kit
Gray Flat Vinyl Sweep, 100' Roll
Clear Vinyl for EZ-Adjust Header (per foot)
Mildew-Resistant Clear Silicone Sealant (10.3 oz Tube)
