Good quality kit
Good quality kit. All the pieces fit well and installation was straightforward.

A clean, simple pull for frameless shower doors. Solid 3/4" brass rod, 8" center to center, with a pull on each side of the door.
The CRL 8" Back-to-Back Solid Pull Handle, No Metal Washers is a back-to-back pull handle for frameless glass shower doors that fits 1/4" to 1/2" glass and mounts 8" center to center. Made by C.R. Laurence (CRL) in 10 finishes, including polished chrome, brushed nickel, matte black.
This back-to-back handle gives you one pull for the inside of the door and one for the outside, the setup commonly used on frameless shower doors. It's made from solid 3/4" brass rod. This is the no-washer style, which keeps the look simple and streamlined where the handle meets the glass. It fits tempered glass from 1/4" to 1/2" thick. You'll need two 1/2" holes in the glass, 8" apart center to center.
| Finishes | 10 |
|---|---|
| Construction | Solid |
| Design Style | Squared |
| Diameter | 3/4 in. (19 mm) |
| Enclosure Type | Corner, Niche, Bathtub, Tailor Made Solutions |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Material | Brass |
| Mounting Center To Center | 8 in. (203 mm) |
| Mounting Type | Glass Mount - Back To Back |
| Opening Style | Slide, Fold, Swing(side), Pivot(floor) |
Good quality kit. All the pieces fit well and installation was straightforward.
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
Two holes 8" apart, center to center. If you're replacing a handle, measure the distance between the centers of your existing holes; it has to match.
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze, Brushed Bronze, Satin Nickel, Polished Brass, Gun Metal. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →