Nice quality knob
Nice quality knob. Easy back-to-back install and the finish matches the rest of the hardware.

A slim cylinder knob for both sides of the door. The protective plastic sleeve makes it a great fit for sliding bypass doors.
The CRL Cylinder Back-to-Back Knobs with Plastic Sleeve is a back-to-back knob for frameless glass shower doors that fits 1/4" to 1/2" glass. Made by C.R. Laurence (CRL) in 4 finishes, including polished chrome, brushed nickel, matte black.
These cylinder knobs add a simple, clean touch without taking attention away from an all-glass door. Each knob is 3/4" across and stands 1-1/4" off the glass, with one on each side of the door. The plastic sleeve protects the knob surface, which is why it's the go-to choice for sliding bypass shower doors. They're made of solid brass and fit glass from 1/4" to 1/2" thick. You'll need a single 3/8" or 1/2" hole through the glass.
| Finishes | 4 |
|---|---|
| Diameter | 3/4 in. (19 mm) |
| Glazing Thickness | 1/4 in. To 1/2 in. (6 mm To 12 mm) |
| Height | 1-1/4 in. (32 mm) |
| Material | Brass |
| Mounting Type | Glass Mount - Back To Back |
Nice quality knob. Easy back-to-back install and the finish matches the rest of the hardware.
This knob is straightforward and well made. Clean look and good everyday quality.
1/4" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
One. The two knobs bolt together through a single 3/8" or 1/2" (10 or 12 mm) hole in the glass.
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
Polished Chrome, Brushed Nickel, Matte Black, Polished Brass. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →