6" Square Ladder Pull, Back-to-Back — Polished Chrome
A tall, square-tube ladder pull that makes a statement on a heavy frameless door. 6" center to center with a 10" overall length.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this handle
The CRL 6" Square Ladder Pull, Back-to-Back is a back-to-back pull handle for frameless glass shower doors that fits 5/16" to 1/2" glass and mounts 6" center to center. Made by C.R. Laurence (CRL) in 5 finishes, including polished chrome, brushed nickel, matte black.
Ladder pulls stand taller than a typical shower door handle, which gives the door a bold, modern look. This one uses 3/4" square brass tubing with crisp, squared lines that pair well with contemporary hardware. It mounts back to back, one bar on each side of the glass, using the through-bolts that come with it. It stands 2-1/2" off the glass. It's made for 5/16" to 1/2" thick glass, with mounting holes 6" apart center to center.
- Back-to-back pair: one bar for the inside, one for the outside
- 6" (152 mm) center to center, 10" (254 mm) overall length
- 3/4" (19 mm) square brass tubing
- 2-1/2" (64 mm) projection from the glass
- Fits 5/16" to 1/2" (8 to 12 mm) tempered glass; through-bolts included
Specs
| Finishes | 5 |
|---|---|
| Construction | Tubular |
| Design Style | Squared |
| Diameter | 3/4 in. (19 mm) |
| Enclosure Type | Corner, Niche, Bathtub, Tailor Made Solutions |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Center To Center | 6 in. (152 mm) |
| Mounting Type | Glass Mount - Back To Back |
| Opening Style | Slide, Fold, Swing(side), Pivot(floor) |
| Overall Length | 10 in. (254 mm) |
| Projection From Surface | 2-1/2 in. (64 mm) |
| Tube Profile | Square |
| Tube Size | 3/4 |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL 6" Square Ladder Pull, Back-to-Back fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
What hole spacing does it need?
Two holes 6" apart, center to center. If you're replacing a handle, measure the distance between the centers of your existing holes; it has to match.
Is it one pull handle or a pair?
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Matte Black, Satin Brass, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.
More like this
8" Back-to-Back Tubular Pull Handle
Traditional Back-to-Back Shower Door Knobs
24" Ladder Style Pull Handle
8" Back-to-Back Square Pull Handle
Round Thru-Glass Finger Pull
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →