Solid weight and feel
These pull handles have a nice substantial weight to them. Clean look and they feel very secure once mounted.

A tall, modern ladder-style pull in square brass tubing. 8" center to center and 12" overall, sold as a back-to-back pair.
The CRL 8" Square Ladder Pull Handle is a back-to-back pull handle for frameless glass shower doors that fits 5/16" to 1/2" glass and mounts 8" center to center. Made by C.R. Laurence (CRL) in 6 finishes, including polished chrome, brushed nickel, matte black.
Ladder pulls run past the mounting points on both ends, so they look taller and more striking than a typical shower door handle. This one uses 3/4" square brass tubing for clean, straight lines that suit contemporary hardware. It comes as a back-to-back set with through-bolts, one pull for each side of the door. It works on sliding, folding, hinged and pivot doors. You need two 1/2" holes in the glass, 8" apart center to center.
| Finishes | 6 |
|---|---|
| Construction | Tubular |
| Design Style | Squared |
| Enclosure Type | Corner, Niche, Bathtub, Tailor Made Solutions |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Hole Diameter | 1/2 in. (13 mm) |
| Material | Brass |
| Mounting Center To Center | 8 in. (203 mm) |
| Mounting Type | Glass Mount - Back To Back |
| Opening Style | Slide, Fold, Swing(side), Pivot(floor) |
| Overall Length | 12 in. (305 mm) |
| Projection From Surface | 2-1/2 in. (64 mm) |
| Tube Profile | Square |
| Tube Size | 3/4 |
These pull handles have a nice substantial weight to them. Clean look and they feel very secure once mounted.
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
Two holes 8" apart, center to center. If you're replacing a handle, measure the distance between the centers of your existing holes; it has to match.
A back-to-back pair: one for the inside of the door and one for the outside, with the hardware to join them through the glass.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, hole spacing and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →