Adjustable Beveled Glass-to-Glass Clamp — Brushed Nickel
A beveled hinged clamp that joins two glass panels at any angle from 90° to 180°.
About this clamp
The CRL Adjustable Beveled Glass-to-Glass Clamp is a glass clamp for frameless glass showers that joins two panels of glass; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 3 finishes, including polished chrome, brushed nickel, oil rubbed bronze.
This beveled adjustable clamp joins two panels meeting anywhere between 90° and 180°. Clear silicone seals the joint. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
- Fits 5/16" to 1/2" (8 to 12 mm) glass
- Adjusts from 90° to 180°
- Beveled edges
- Solid brass
Specs
| Finishes | 3 |
|---|---|
| Adjustable | Yes |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Glass To Glass |
Complete the look in Brushed Nickel
Common questions
What glass thickness does the CRL Adjustable Beveled Glass-to-Glass Clamp fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many clamps do I need?
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.
More like this
Square Hole-in-Glass Fixed Panel U-Clamp
Beveled Hole-in-Glass Fixed Panel U-Clamp
Square 90° Glass-to-Glass Clamp
90° "Sleeve Over" Glass Clamp
Oversized Fixed Panel U-Clamp
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →