Good quality clamp
Good quality clamp. Easy to install and holds the panel securely.

Slides over the corner where two glass panels meet at 90° and locks on with set screws. No holes in the glass.
The CRL 90° "Sleeve Over" Glass Clamp is a glass clamp for frameless glass showers; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 11 finishes, including polished chrome, brushed nickel, matte black.
Sleeve over clamps fit over the edge of the glass and tighten with nylon-tipped set screws, so the glass doesn't need holes or notches. They hold the panels in place while the silicone in the joint cures and take the shear load after that; the silicone is what seals the joint and holds the panels together. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
| Finishes | 11 |
|---|---|
| Glass To Glass Angle | 90 |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Glass To Glass |
Good quality clamp. Easy to install and holds the panel securely.
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze, Brushed Bronze, Satin Nickel, Polished Brass, Unlacquered Brass, Gun Metal. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →