Clean modern look and solid hold on the glass
Clean modern look and solid hold on the glass. Recommend it.

A beveled wall clamp with a 90° leg that holds a fixed glass panel to the wall, floor or ceiling.
The CRL Beveled Fixed Panel Clamp with Small Leg is a glass clamp for frameless glass showers that holds a fixed glass panel to the wall, curb or floor; it fits 3/8" to 1/2" glass. Made by C.R. Laurence (CRL) in 8 finishes, including polished chrome, brushed nickel, matte black.
This beveled clamp mounts to the wall, ceiling or floor and holds a vertical fixed panel through a 3/4" (19 mm) hole in the glass. The 90° leg gives it a stronger mounting surface, and it leaves only a 1/16" (2 mm) gap to the wall. Solid brass, for 3/8" to 1/2" (10 to 12 mm) tempered glass.
| Finishes | 8 |
|---|---|
| Design Style | Beveled |
| Enclosure Type | Corner, Niche, Bathtub, Tailor Made Solutions |
| Glazing Thickness | 3/8 in. To 1/2 in. (10 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Wall / Ceiling Mount |
Clean modern look and solid hold on the glass. Recommend it.
3/8" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Oil Rubbed Bronze, Brushed Bronze, Polished Brass, Unlacquered Brass. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →