Geneva 3-Point Movable Transom Clamp — Polished Chrome
A ceiling-mounted transom clamp that holds the glass open 45° in, closed, or 45° out.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this clamp
The CRL Geneva 3-Point Movable Transom Clamp is a transom clamp for frameless glass showers; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 3 finishes, including polished chrome, brushed nickel, oil rubbed bronze.
This clamp mounts a movable transom to the ceiling instead of its sides, so more of the glass shows. It holds at three points: 45° inward, closed, and 45° outward. Its square look matches Geneva hinges. For 5/16" to 1/2" (8 to 12 mm) glass.
- Fits 5/16" to 1/2" (8 to 12 mm) glass
- Mounts to the ceiling
- Stops at 45° in, closed and 45° out
- Square look matches Geneva hinges
- 3-1/2" x 2-3/16" (89 x 56 mm)
Specs
| Finishes | 3 |
|---|---|
| Back Plate | Full |
| Edge Profile | Square |
| Glazing Thickness | 5/16 in. (8 mm) to 1/2 in. (12 mm) |
| Height | 2-3/16 in. (56 mm) |
| Material | Brass |
| Maximum Door Width - 2 Hinges | 28 |
| Mounting Type | Ceiling Mount |
| Series | Geneva |
| Width | 3-1/2 in. (89 mm) |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL Geneva 3-Point Movable Transom Clamp fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many clamps do I need?
This is one transom clamp. Replace a worn clamp with the same style, size and finish so it lines up with the others.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Oil Rubbed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.
More like this
Square Hole-in-Glass Fixed Panel U-Clamp
Beveled Hole-in-Glass Fixed Panel U-Clamp
Square 90° Glass-to-Glass Clamp
90° "Sleeve Over" Glass Clamp
Oversized Fixed Panel U-Clamp
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →