Extra-Soft 'H' Wipe for 3/8" Glass
Our versatile 'H' wipe with extra-soft legs for a quieter close.
The CRL P375HWS is a 95-inch extra-soft 'h' wipe for 3/8-inch glass. Made by C.R. Laurence (CRL); available in clear.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
- Seals a door against a wall
- Hinge or pivot side, against the panel that supports the door
- Door to fixed panel in a straight line (180°)
- Works as a bottom sweep too
- Extra-soft legs for a quiet close
- 95" length, cut to fit
About this seal
The same do-everything seal as our multi-purpose 'H' wipe, with extra-soft twin legs, so the door closes quietly instead of tapping against hard plastic. Use it against a wall, on the hinge or pivot side, between a door and panel, or as a bottom sweep. The soft legs trim easily. Pressure fits onto 3/8" glass. 95" length, cut to fit.
Fit & specs
| Glass thickness | 3/8" |
|---|---|
| Installs by | Pressure fits onto the glass |
| Used for | Door against a wall Hinge or pivot side Door to fixed glass panel (straight line) Bottom of the door |
| Hardness | 62-65 durometer |
| Length | 95 in. (2413 mm) |
| Material | Polycarbonate |
| Pre-Applied Tape | No |
Common questions
What glass thickness does the CRL P375HWS fit?
The CRL P375HWS fits 3/8" glass. Measure your glass at the edge before ordering; a seal made for a different thickness will not stay on.
How do I install the CRL P375HWS?
It pressure fits onto the edge of the glass; no glue or tape needed. Clean and dry the edge first.
How do I cut the CRL P375HWS to length?
Measure the glass edge where the seal goes, then cut the seal to that length with plastic trim snips like the CRL PTS89 or a fine-tooth hacksaw. The snips give a clean, straight or angled cut in one squeeze.
How long is the P375HWS?
It comes in a 95" length that you cut to fit your door.
Can I return the P375HWS?
No. All sales are final: due to the nature of shipping these long seals, items cannot be returned. Measure your glass thickness and check the suggested gap before you order; our measuring guide shows how.
