Ceiling Mount "Sleeve Over" Glass Clamp — Matte Black
Holds the top edge of a glass panel to the ceiling, sliding over the glass with no holes needed.
About this clamp
The CRL Ceiling Mount "Sleeve Over" Glass Clamp is a glass clamp for frameless glass showers that mounts a glass panel to the ceiling; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 3 finishes, including polished chrome, brushed nickel, matte black.
This sleeve over clamp mounts to the ceiling and fits over the top edge of the glass, locking on with nylon-tipped set screws, so the glass needs no holes or notches. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
- Fits 5/16" to 1/2" (8 to 12 mm) glass
- Mounts to the ceiling
- No holes or notches needed
- Tightens with nylon-tipped set screws
- Solid brass
Specs
| Finishes | 3 |
|---|---|
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Ceiling Mount |
Complete the look in Matte Black
Common questions
What glass thickness does the CRL Ceiling Mount "Sleeve Over" Glass Clamp fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many clamps do I need?
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Matte Black. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.
More like this
Square Hole-in-Glass Fixed Panel U-Clamp
Beveled Hole-in-Glass Fixed Panel U-Clamp
Square 90° Glass-to-Glass Clamp
90° "Sleeve Over" Glass Clamp
Oversized Fixed Panel U-Clamp
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →