90° "Sleeve Over" T-Junction Glass Clamp — Polished Chrome
Slides over a T-shaped glass joint where panels meet at 90°. No holes in the glass.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this clamp
The CRL 90° "Sleeve Over" T-Junction Glass Clamp is a glass clamp for frameless glass showers; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 2 finishes, including polished chrome, brushed nickel.
This sleeve over clamp fits over a T-junction where glass panels meet at 90° and locks on with nylon-tipped set screws, so the glass needs no holes or notches. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
- Fits 5/16" to 1/2" (8 to 12 mm) glass
- T-junction at 90°
- No holes or notches needed
- Tightens with set screws
- Solid brass
Specs
| Finishes | 2 |
|---|---|
| Glass To Glass Angle | 90 |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Glass To Glass |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL 90° "Sleeve Over" T-Junction Glass Clamp fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many clamps do I need?
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
What finishes does it come in?
Polished Chrome, Brushed Nickel. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.
More like this
Square Hole-in-Glass Fixed Panel U-Clamp
Beveled Hole-in-Glass Fixed Panel U-Clamp
Square 90° Glass-to-Glass Clamp
90° "Sleeve Over" Glass Clamp
Oversized Fixed Panel U-Clamp
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →