Solid piece of hardware
Solid piece of hardware. No flex in the glass and a clean finished look.

Lets a glass transom above the door pivot open to let steam out, joined to an inline fixed panel.
The CRL Square 180° Movable Transom Clamp is a transom clamp for frameless glass showers; it fits 3/8" to 1/2" glass. Made by C.R. Laurence (CRL) in 7 finishes, including polished chrome, brushed nickel, matte black.
This square clamp lets a movable transom rotate off an inline fixed panel, so steam can escape. Center it on the transom for balanced movement. The largest transom it supports is 16" x 30" (406 x 762 mm). Solid brass, for 3/8" to 1/2" (10 to 12 mm) tempered glass; the fixed panel needs a 3/4" (19 mm) hole and the transom a notch.
| Finishes | 7 |
|---|---|
| Design Style | Squared |
| Enclosure Type | Niche, Tailor Made Solutions |
| Glass To Glass Angle | 180 |
| Glazing Thickness | 3/8 in. To 1/2 in. (10 mm To 12 mm) |
| Height | 2 in. (51 mm) |
| Material | Brass |
| Mounting Type | Pivoting Glass To Glass |
| Width | 4-1/16 in. (103 mm) |
Solid piece of hardware. No flex in the glass and a clean finished look.
Strong and reliable clamp. Glass stays put and the finish looks consistent.
3/8" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
This is one transom clamp. Replace a worn clamp with the same style, size and finish so it lines up with the others.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze, Polished Brass. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →