Left Hand "Sleeve Over" Wall Mount Glass Clamp — Polished Chrome
Mounts to the wall and slides over the edge of a fixed panel. No holes in the glass. Left hand as seen from outside the shower.
Temporarily out of stock at our supplier. You can still order; it ships when restocked.
About this clamp
The CRL Left Hand "Sleeve Over" Wall Mount Glass Clamp is a glass clamp for frameless glass showers that mounts a glass panel to the wall; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 7 finishes, including polished chrome, brushed nickel, matte black.
This sleeve over clamp fastens to the wall and fits over the glass edge, locking on with nylon-tipped set screws, so the glass needs no holes or notches. It holds the panel while the silicone cures and takes the shear load after that. Left hand as viewed from outside the shower. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
- Fits 5/16" to 1/2" (8 to 12 mm) glass
- Left hand (viewed from outside)
- No holes or notches needed
- Tightens with nylon-tipped set screws
- Solid brass
Specs
| Finishes | 7 |
|---|---|
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Handing | Left Hand |
| Material | Brass |
| Mounting Type | Wall Mount |
Complete the look in Polished Chrome
Common questions
What glass thickness does the CRL Left Hand "Sleeve Over" Wall Mount Glass Clamp fit?
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
How many clamps do I need?
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
What finishes does it come in?
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Satin Brass, Oil Rubbed Bronze, Brushed Bronze. Match the finish of the hinges and other hardware on your shower.
Can I return it?
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.
More like this
Square Hole-in-Glass Fixed Panel U-Clamp
Beveled Hole-in-Glass Fixed Panel U-Clamp
Square 90° Glass-to-Glass Clamp
90° "Sleeve Over" Glass Clamp
Oversized Fixed Panel U-Clamp
Match your holes, glass and finish.
Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →