No movement at all
This clamp is solid and looks clean once installed. No movement in the glass panel at all.

Joins two glass panels at any angle from 90° to 180°, sliding over the glass with no holes needed.
The CRL Adjustable "Sleeve Over" Glass Clamp is a glass clamp for frameless glass showers; it fits 5/16" to 1/2" glass. Made by C.R. Laurence (CRL) in 8 finishes, including polished chrome, brushed nickel, matte black.
This adjustable sleeve over clamp joins two panels meeting anywhere from 90° to 180°. It fits over the glass edges and locks on with nylon-tipped set screws, so the glass needs no holes or notches, and holds the panels while the silicone cures. Solid brass, for 5/16" to 1/2" (8 to 12 mm) tempered glass.
| Finishes | 8 |
|---|---|
| Adjustable | Yes |
| Glazing Thickness | 5/16 in. To 1/2 in. (8 mm To 12 mm) |
| Material | Brass |
| Mounting Type | Glass To Glass |
This clamp is solid and looks clean once installed. No movement in the glass panel at all.
5/16" to 1/2" thick tempered glass. Measure your glass at a bare edge before you order; our measuring guide shows how.
This is one glass clamp. Most fixed panels use two or three clamps. Replace a worn clamp with the same style, size and finish so it lines up with the others.
Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, Oil Rubbed Bronze, Brushed Bronze, Polished Brass, Unlacquered Brass. Match the finish of the hinges and other hardware on your shower.
No. All sales are final, so please check your glass thickness, clamp style and finish before you order.





Measure center to center between your existing holes and check your glass thickness. A new handle has to match both.
How to measure your glass →